Mistake on this page? Email us

Device Management Client 4.9.1

Important note on testing before upgrading:

Before upgrading deployed devices to a new version of Device Management Client, you must test that you can:

  • Perform a firmware-over-the-air update of a device with the new firmware image.
  • Perform an additional firmware-over-the-air update on the device with the new firmware image to check that the new firmware image is updateable.

Device Management Client

  • Fixed the incorrect overriding of CoAP retransmission buffer size.

Platform Adaptation Layer (PAL)

  • [Zephyr] Fixed a memory leak on DNS handling.

Known issues

  • The earlier revisions of LPCXpresso 546XX have a different QSPI chip than some of the later revisions. The application needs to specify the chip at compile time. Select the correct QSPI chip in the board configuration file (define_NXP_LPC54628.txt). This depends on the board revision.
  • [PAL tests] PAL file system and PAL update tests currently support external SD card storage. Support for other storage types will be added in future releases.
  • [PAL tests] PAL TLS test (TCPHandshakeWhileCertVerify_threads) is not working on Mbed OS 5.13.0.
  • Update client full resume doesn't work. If the image download was interrupted, a full download starts from the beginning.
  • Update client image encryption feature is going to be improved in the next PDMC release with a bootloader change. Customers that are planning to release an Mbed OS based device to production, that is using an external flash, are advised to wait for the next PDMC release.

Mbed OS

We recommend you read the Mbed OS release notes for known issues and their latest status.

  • PSA is in preview level and as such isn't ready for production yet.
    • You can't update the precompiled PSA binary through firmware update. You can only update the application itself.
    • K64F:
      • You can use the board in PSA mode (without real hardware PSA implementation).
      • The configuration file that allows this is placed under the configs-psa folder in the example.
      • The PSA mode adds RAM consumption (static +3.5KB) and flash/ROM consumption (+18.5KB).
      • Arm and partners are optimizing the solution in future releases.

Linux

  • Firmware update installation of very large images on Raspberry Pi3B or Pi3B+ may result in a mmc0 timeout failure. This is a generic Raspberry Pi3 issue. See RPI issue #2392.
  • Firmware update from one Linux distribution version to another does not work. For example, firmware update from Yocto distribution Morty to Rocko is not currently possible because of Linux version-dependent files (device tree) in the BOOT partition. Therefore, you must update within one major version of a distribution.
  • glibc versions 2.23 and 2.24 have a bug in thread creation. It can cause random crashes with Linux.
    • If possible, update glibc to version 2.25 (or later). See sourceware issue 20116 for details.
    • We have implemented a workaround for this issue to decrease its likelihood. This issue may still occur under certain circumstances.
  • The Device Management Client application must run as root to have access rights to perform the firmware update.
    • This is not the most secure way to handle this issue, so a more secure implementation will come later.
  • Yocto distribution has only been tested in developer certificate mode.
  • Yocto distribution used does not yet support Raspberry Pi4.

Device Management Client Third Party IP report

Device Management Client uses some third-party IP (TPIP) components. This table lists the TPIP and sources:

Original License Description
bsdfiff BSD 2 clause Diff algorithm used for delta update image generation.
LZ4 BSD 2 clause (lz4.c and lz4.h under /lib in LZ4) Compression algorithm used for compressing delta update images.
TinyCBOR MIT Factory configurator client (FCC) uses TinyCBOR, which is a constrained node implementation of CBOR in C, with slight modifications. The code is at mbed-cloud-client/tinycbor and in a standalone repository in GitHub.
Unity MIT Platform Adaptation Layer (PAL) tests use Unity framework from ThrowTheSwitch. The code is at mbed-cloud-client/mbed-client-pal/Test/Unity.

NXP SDK

Additional TPIP for NXP SDK:

Original License Description
Amazon FreeRTOS kernel v10.2 MIT FreeRTOS kernel from Amazon.
lwIP Modified BSD Lightweight IP stack.
Platform support files BSD-3 Clause Platform specific files in platform/NXP.
LPC54608J512 Linker script BSD-3 Clause Linker script for GNU C.
LPC54xxx generated configuration files BSD-3 Clause Board-support specific generated files in pal-platform/SDK/LPCXpresso54628/generated.
LPC54xxx board support software Copyright NXP Board support software for LPC5400-series - we do not provide this; you must download this with MCUXpresso SDK Builder yourself.
MIMXRT106XXX Linker script BSD-3 Clause Linker script for GNU C.
EVK-MIMXRT1060 generated configuration files BSD-3 Clause Board-support specific generated files in pal-platform/SDK/EVK-MIMXRT1060/generated.
EVK-MIMXRT1060 board support software Copyright NXP Board support software for EVK-MIMXRT1060 - we do not provide this; you must download this with MCUXpresso SDK Builder yourself.

Keil SDK

Original License Description
Platform support files BSD-3 Clause Platform specific files in platform/KEIL.
Platform adaptation layer files MIT Platform adaptation layer files in Source/Port/Reference-Impl/OS_Specific/RTX_MW.

Renesas SDK

Additional TPIP for Renesas SDK (FSP):

Original License Description
Amazon FreeRTOS kernel v10.3 MIT FreeRTOS kernel from Amazon.
Renesas Flexible software Package (FSP) v1.0.0 Copyright (c) Renesas Board support package for RA6M3 boards. Running pal-platform.py will git clone this repository to your work area under pal-platform/SDK/Renesas_EK_RA6M3/fsp.
Renesas e2studio generated configuration files Copyright (c) Renesas Renesas e2studio generates a number of files, available in pal-platform/SDK/Renesas_EK_RA6M3/e2studio_gen.
lwIP Modified BSD Lightweight IP stack.
Platform support files BSD-3 Clause Platform specific files in platform/Renesas_EK_RA6M3.
Platform adaptation layer files MIT Platform adaptation layer files in Source/Port/Reference-Impl/OS_Specific/Renesas_EK_RA6M3.

Secure Device Access (SDA)

If you enable Secure Device Access (SDA), you will use some additional TPIP:

Original License Description
cose-c BSD-3 clause IETF Concise Binary Object Representation (CBOR) Encoded Message Syntax (COSE), a copy of this library is located under mbed-cloud-client/tree/master/secure-device-access-client/cose-c.

Mbed OS

You also get more TPIP with the Mbed OS release itself. See its LICENSE.md file for details.